Two standard wire nuts which are usually included in a utility sink package.A pair of gloves to protect your hands when working with the tools.Two adjustable wrenches (one large enough to fit both nuts). If there is one, take some Teflon tape with you as well.A utility sink with an attached faucet – make sure it is not leaking!.Adapter that will let you connect the sink to a water source.Garden hose or a connector pipe that fits into it.Make sure they are all accessible at your home so you don’t have to go shopping and then come back again just for the sake of completing this task. If the flow rate is below three gallons per minute, then forget about hooking up anything larger than a typical sink sprayer.įirst of all, you should consider the materials you will need. Turn on your faucet all the way and see how much water comes out of either one in 15 seconds (or less if possible). If you are unsure about the water pressure, then you can use a garden hose or bucket to test it. If the water runs fine, then you can probably hook up a hose. If you turn on your sink and there’s no spray or it doesn’t run smooth, then that means the flow rate (gallons per minute) isn’t high enough to support a hose connection. The first thing to check is the water pressure. We’ll also include step-by-step instructions. But how do you hook up the utility sink to the garden hose? It’s actually really simple! In this article, we’ll go over what you need and how to set it all up. Many people have a utility sink in their backyard for cleaning things like garden hoses.
0 Comments
Leave a Reply. |